Linuxpops(
C) >> help /a /a
Command Args
Mode nArgs Help
about : A [*] Show Version info
accum : A [*] Accumulate Selected Scans
accaxis : X-axis Y-axis
C [0] Set Accum Plot X, Y Axis
alias : A [*] Alias Sub-System
alma : A [*] Show ALMA Calibrators or Named
atm : A [*] Plot the ATM profiles
attach : cmd_file A [1] Fork an external program
autocal : expect_flux
C [1] Auto Calibrate the
data autoscale : A [*] Set Both Axis to Autoscale
autoshift : Hn S [1] Compute # channels to
shift avg : S [0] Print the Average Intensity
baccept : A [0] Accept & Use Beam Eff Results
backend : A [0] Set Name of the Backend
badchan : S [*] Use Mouse to set Bad Chans(s)
baseline : A [0] Remove Baselines from Current Plot
batch : [fname | list] A [*] Batch / Procedure Function
beameff : [Ch1][Ch2 Ch3 Ch4] A [*] Set the Beam Eff for up to 4 Chans
befd :
C [*] Perform A Beam Eff Reduction (FD)
bkres : freq (MHz) S [1] Set Backend Resolution
bknameres : A [0] Set Name and Resolution of Backend
bloop : S [0] Loop while Moving Baseline segs
bmove : S [0] Move a Baseline Box Edge
boxcar : S [0] Performs a Boxcar Smoothing
bspline : S [*] Fit a BSpline to the Y-Axis
data bset : S [*] Set up to 32 Baselines Regions
bscan : Begin-Scan A [1] Select Staring Scan to Analyze
bshape : S [0] Show the Boxcar Shape
burntime : A [*] Print Scan/UT/Burn-Time/Dur
bzero : +/-n S [1] Zero n chans of
data from ends
c1 : A [0] Accumulate IF 1
c12 : A [0] Accumulate IF 1 & 2
c13 : A [0] Accumulate IF 1 & 3
c2 : A [0] Accumulate IF 2
c24 : A [0] Accumulate IF 2 & 4
c3 : A [0] Accumulate IF 3
c34 : A [0] Accumulate IF 3 & 4
c4 : A [0] Accumulate IF 4
cb : A [0] Accumulate IF's 1 & 2
cc : S [*] Set Plot Axis to Channel Channel
cf : S [*] Set Plot Axis to Channel Freq
cv : S [*] Set Plot Axis to Channel Velocity
cancel : A [*] Send 'cancel' to xgraphics program
calmode : None|Scale|Beam|eff
C [0] Set the Calibration
Mode ccur : S [0] Get Cursor Channel Number
centerall :
C [0] Analyzes Lots of Maps Rows
centerrow :
scan# C [0] Analyzes A Map Center Row changes : A [0] Show Linuxpops Feature/Bug Fixes
chngres : S [0] Change Spectral Resolution
checkfile : [ | less] A [0] Dump a listing of scans in file
check_sdd : [
scan # | less] A [0] Dump Raw Info
for Scan From File
class : S [0] Ingest/Export Class type file
clearall : A [*] Clear ALL Dynamic Variables
clearenv : A [0] Completely Clear an Environment
clearvar : A [0] Clear a Dynamic Variable
codeview : keyword A [*] Show the Code Segment for Function
color : color A [*] Set Text Color to 'color'
copyenv : src dest A [2] Copies Environment: src -> dest
copyraw : filename A [*] Copies Raw
data to filename
cp : src_file dest_file A [*] Copy src_file to dest_file
cread : configfile A [1] Read Configuration File
crisscross:
C [*] Process Criss Cross Map
cwrite : configfile A [1] Write Configuration File
data : A [0] Show Scan's Data Points
date : [yyyy.mmdd] A [*] Select UT-Date Only
datestring: A [*] Place a Date on Plot
daymode : A [0] Switch to Bright Color Display
dbase : A [*] Entry into Database sub-system
dcoffset : [offset] S [*] Subtract a DC offset from plot
deconvol :
C [0] De-Convolve Planet from Beam
dedit : S [0] Interactive Data Array Edit
delfreq : delta-freq A [1] Frequency Matching Tolerance
delay : [time_in_uS] A [0] Pause execution time micro-secs
demo : A [0] Perform Various 'demo' functions
dlist : A [*] List Dynamic Variables
dobeam :
C [0] Perform Beam Eff on Selected Scans
done : A [0] Dummie 'done' handler
double : double_var_name A [1] Create a Double Variable
dumpscans : [ | less] A [0] Dump a listing of scans in file
else : A [0] Part of the IF function
end : A [0] End of procedure
endfor : A [0] End of FOR procedure
endif : A [0] End of IF procedure
env : A [0] List The Environments Titles
escan : Ending-Scan A [1] Select Ending Scan to Analyze
exit : A [0] Exit Program
expected : tmb flux A [0] Set the Expected Tmb & Flux
eval : A [*] Evaluate command line math
f : Scan_Number A [0] Show First IF
fboffset : seg [tstart,tend] S [*] Apply T-Offset to block of chans
fc : S [*] Set Plot Axis to Freq Channel
fcur : S [0] Get Cursor Frequency Value
feed : IF-Feed A [1] Select IF to Analyze
ff : S [*] Set Plot Axis to Freq Freq
ffb : S [*] FFB Diagnositics
fft : [pick | cut] S [*] FFT Sub-System
focus :
C [0] Focus Analysis Routines
findseq :
C [0] Display a List of Sequences
filename : filename A [0] Load SDD file
files : A [*] Show Current Files
fillpat : freq S [1] Generate sin/cos/tan/sqr wave
for : A [*] FOR Function
fork : [create|delete] S [*] Create or Delete Hyper-Fine Label
freex : A [0] Set X-Axis Range to Auto Scale
freey : A [0] Set Y-Axis Range to Auto Scale
freq : [frequency] A [*] Select Frequency to Analyze
fv : S [*] Set Plot Axis to Freq Velocity
fver : [
version] A [*] Change the Data File Version
g1 : S [*] Show Latest First Filter Cal
g11 : S [*] Show Latest First MAC Cal
g2 : S [*] Show Latest Second Filter Cal
g12 : S [*] Show Latest Second MAC Cal
g3 : S [*] Show Latest Third Filters Cal
g4 : S [*] Show Latest Fourth Filters Cal
gauss : [plot] A [*] Compute a Gaussian and [plot]
get :
scan# A [1] Fetch Scan
gfilename : gains_filename S [0] Set Gains filename
gget :
scan# S [1] Fetch Gains Scan
glabel : S [*] Place Gaussian Results on Plot
glist : [/g /h /p] S [0] Dump a Listing of Gain Scans
gracefit : A [0] Fit a 'nfit' LSQ-fit to
data greview : S [0] Display an Array of Scan Plots
grid : [x | y | full] A [0] Set Plot Grid
Mode gmapdive :
C [0] Plot Grid Map with varing dB's
gmapgauss :
C [0] Fit Gaussian to a Gridded Map
gmapgrab :
C [0] Force Gridmap Window to be Active
gmapgrid :
C [0] Accumulate Selected
CONTMAP Scans
gmaplimits:
C [0] Set / Reset Plotting Limits
gmapmapbase:
C [*] Remove Baseline from Gridded Map
gmaprotate:
C [*] Rotate Gridmap and Snap images
gmappgauss:
C [0] 2D Gaussian Gridded Map Center Row
gmapplot :
C [0] Plot 3D Gaussian Gridded Map
gmapslice : row | col
C [0] Display a slice of Grid Map
gmapstats :
C [0] Display Stats of Grid Map
gset : S [0] Set the Gains File the Same
gver : [
version] S [0] Change the Gains File Version
h0 : A [0] Set Active Working Array to
H0
h1 : A [0] Set Active Working Array to H1
h2 : A [0] Set Active Working Array to H2
h3 : A [0] Set Active Working Array to
H3 h4 : A [0] Set Active Working Array to
H4 h5 : A [0] Set Active Working Array to
H5 h6 : A [0] Set Active Working Array to
H6 h7 : A [0] Set Active Working Array to
H7 h8 : A [0] Set Active Working Array to
H8 h9 : A [0] Set Active Working Array to
H9 hard : A [0] Print
PS of Most Recent Plot
halves : S [0] Sum Parallel Plots together
header : A [0] Display Header for Last Scan
help : [help_topic] A [*] Show Help
helperwait: A [*] Wait on Helper Response / timeout
histo : A [0] Set plotting format to Histograph
histogram : S [0] Plot a Histogram of Spectral Data
history : A [0] Show Command Line History
hline : S [*] Add a Horizontal Line to Plit
hload : image_file A [1] Load image_file into
H* array
hsave : image_file A [1] Save all
H* images to image_file
id : A [0] Print ID info
if : A [*] IF Function
ignore :
scan-1 [
scan-2 ...] A [*] Add
scan(s) to ignored list
igfile : ignore_file A [*] Populate ignored list from file
image : S [0] Image Sub-System
int : integer_var_name A [1] Create a Integer Variable
invert : [0 | 1] A [*] Invert Cont Phases or Spectra
label : [create|delete] S [*] Create or Delete a screen Label
let : [
args] A [*] Assign a value to a variable
linearplot: A [0] Set Y-Axis to Linear Scale
lines : A [0] Set plotting format to Lines
linepts : A [0] Set plotting format to Line Points
list : acc|
env|foc|ignored|qk5|map|ewf|nsf|
ondata|seq|tip A [*] List Selected Scans, or of type
load : filename A [1] Read in file of Commands
logplot : A [0] Set Y-Axis to 10*log10(y/pk)
logwatch : A [0] Start log viewer
makehelp : A [*] Make the Help Files (Admin Only)
mapangle : Angle#1 Angle#2
C [2] Set Display Angle of a Gridded Map
marker : [create|delate|list S [*] Place Vertical Markers on Plot
mbase : #_of_baseline_samps
C [1] Set # of Samps for Map Baselines
measure : S [0] Measure Dist Between Spec Features
midrow :
scan#
C [1] Show the Middle Row of Map
mode : mode A [1] Set the
Mode; CONT | SPEC |
OTF molecule : S [0] Manually Select a Line for ID
mv : A [*] Rename or Move a file
name : name_of_env A [1] Set Title of Current Environment
nbaseset : [seg start end][/l] S [0] Set All or Some Baselines at Once
nbset : S [*] Set Baseline Negative Regions
nget : A [*] 'get' nsave Scan
nightmode : A [0] Switch to Dark Color Display
normalize :
C [0] Normalize Accum / Object array
nsac : S [0] Sum up a number of nsave scans
osb : S [*] Change Display to Other Side Band
object :
C [*] Object Handling Routine
ons : 0 | 1
C [*] Turn 'ons' off or on
otfdirect : O [0] Send
OTF Dataserv a direct command
otffix : O [0] Fix missing
OTF Map Cells
otfhelp : O [0] Print
OTF Help
otfdisplay: [sample_num] O [0] Display an individual 100 mS plot
otfslice : [col x][row y] O [0] Display a Row or Col
OTF Slice
paramgui : A [0] Select Params via interactive GUI
params : A [0] Show Selected Criteria
page : A [0] Clear the plot window
papersize : [width height | - ] A [*] Set the Plot Printout Page Size
pause : A [0] Pause execution until Keyboard hit
pboot : A [0] Print Latest Boot Strap Block
peak : S [0] Show Peak Temperature
peaks : S [0] Show All Peak Temperature
pdfl : S [0] Ingest & Convert PDFL type file
pflux : planet A [1] Show a Plot of Planet Flux
pgauss : A [0] Print Results of Last Gaussian Fit
phases :
C [0] Show Phases of current Scan
planets : A [0] List Planet info
plotseq :
C [0] Plot the Results of SEQ
pname : A [*] Show Pending Plot File Name
points : A [0] Set plotting format to Points
preview : A [0] Review Stack Scans in Parallel
print : A [0] Print a Dynamic or Header Variable
prune : filename [/r] A [*] Create a Criteria based SDD file
pshow : scan_num S [1] Show Parallel Scans side by side
psc12 : S [0] Show Parallel Accum for IF1 & IF2
psc13 : S [0] Show Parallel Accum for IF1 & IF3
psc24 : S [0] Show Parallel Accum for IF2 & IF4
psc34 : S [0] Show Parallel Accum for IF3 & IF4
pstamp : S [*] Place a Postage Stamp of a region
ptime : Planet Flux UT A [1] Set Time for Planet Flux Calc
quit : A [0] Quit Program
q1 : A [*] Show Latest First Filter IF Scan
q11 : A [*] Show Latest First MAC IF Scan
q2 : A [*] Show Latest Second Filter IF Scan
q12 : A [*] Show Latest Second MAC IF Scan
q3 : A [*] Show Latest Third Filters IF Scan
q4 : A [*] Show Latest Fourth Filters IF Scan
qreject : A [0] Print Scan Rejection Tally
qreview : A [0] Review Stack Scans in Quad mode
qshow : scan_num S [1] Show Quad Array of Scans
rap : S [*] Process Freq-Switched Array
read : filename A [1] Read in file of Commands
readbadch : filename S [1] Read in bad channel file
recall : A [*] Fetch 'nsave' Scan
record : [on|off] filename A [*] Record
commands to filename
region : A [*] Map Region Sub System
refresh : A [0] Repaint the Plot Window
rejection : rej1 rej2 A [*] Set Receiver Rejections
report : S [*] Print a Scan Report
resetenv : A [0] Reset All Criteria
restoreenv: A [0] Restore a Saved Environment
review : A [0] Review and possibly Ignore Scans
rms : S [0] Print out the current TP &
rms
rmbase : S [0] Remove Computed Baseline
run : filename A [1] Run
commands in file
s : Scan_Number A [1] Show Second IF
save : S [0] Save
H? Image to nsave in Savefile
saveall : configfile A [1] Write All Configurations to File
savedata : A [0] Write Data Table to File
saveenv : A [0] Save the Current Environment
sat : S [*] Strings And Things sub-system
say : [comments...] A [0] Say Something in the Terminal
scale : A [*] Set the Calibration Scale
scansum : S [*] Scan Summary Sub-System
selfrej : ratio A [1] Auto Reject if 'ratio' >
rms/trms
selprint : [land|bsize|cpixx] A [*] Print the Current X Selection
set : [
args] A [*] Assign a value to a variable
sex : [
args] A [*] Convert num to/from sexigesimal
sfocus :
scan S [*] Analylis a Spectral Line Focus
sfilename : save_filename A [0] Set SAVE filename
sdd : A [0] Ingest/Export older SDD type file
show : A [0] Process and Show Selected Scan
showbad : S [0] Show Bad Chans to
feed into Rambo
shift : S [0] Shift Spectra ASHIFT channels
sleep : [time_in_secs] A [0] Pause execution time secs
source : [sourcename] A [*] Select Source to Analyze
spec5 : S [0] Analysis a Spectral Five Point
spike : S [0] Remove Spikes in Data
stop : A [0] Stop a loop
splat : S [0] Look up Molecular line near FCUR
split : [0 | 1]
C [0] Set Split Phases Flag
sptip : scan_num
C [1] Process SPTIP Data
stack : [clear|fill|loop] A [*] Stack Routines
subtractimg: Hx Hy S [0] Subtract Hx from Hy;
results in
H0summary : A [0] Print a Summary in Online Data
survey : filename S [0] Write out a Survey File
switchenv : env_number A [1] Switch to Environment n
system : [
args] A [*] Do system command; alias for ':'
table : A [0] Printout Data Phase Values
taccept :
C [0] Use Sptip Result as Current Tau0
tau0 : manual_tau0
C [1] Set the Manual Zenith Tau0
tcsh : A [0] Start a shell for system
commands tcur : S [0] Get Cursor Temperature
tell : acc|
env|foc|ignored|qk5|map|ewf|nsf|
ondata|seq|tip A [*] List Selected Scans, or of type
tips :
C [0] Show All SPTIP's
title : name_of_env A [1] Set Title of Current Environment
titleblock: S [*] Place a Title Block on the Plot
trec : S [*] Display T-Receiver Plot
tsys : A [*] Tsys Sub-System
ufilename : user_filename A [0] Set User filename
unalias : A [0] Undefine an Alias
variables : A [*] Show Useful Variable Info
vc : S [*] Set Plot Axis to Velocity Channel
vcur : S [0] Get Cursor Velocity Value
vf : S [*] Set Plot Axis to Velocity Freq
vi : A [*] Edit a file using 'vim '
vv : S [*] Set Plot Axis to Velocity Velocity
verbose : [0 - 5] A [*] Set the Verbose Level
versions : A [0] Show List of Availble Data Files
which : A [0] Show Current Environment Params
writebadch: filename S [1] Save Bad Channels to file
writebase : filename S [1] Save Baseline segments to file
writeirc : logfile S [1] Write a IRC+10216 Record (debug)
xcorrelate: S [0] Correlate H1 & H2 Arrays
xgrab : A [*] Grab the Xgraphic Plot Extents
xrange : x1 x2 S [2] Set the X-Axis Range to x1, x2
xset : S [0] Use Mouse to Set the X-Range
xx : A [0] Replot Last Graph
xwatch : A [0] Open
term showing XGraphics.log
yfactor : gain_scan_num S [0] Produce Y-Factor Plot from Gains
yrange : y1 y2 A [2] Set the Y-Axis Range to y1, y2
yset : A [0] Use Mouse to Set the Y-Range
zero : S [*] Zero a range of
data points
zoom : S [*] Use Mouse to Set both X & Y Range
@ : filename A [1] Read in file of Commands
? : [help_topic] A [*] Show Help
Linuxpops(C) >>
1.8.5 
