CAMAC Progress Report

                     Week Ending: February 9, 2001
                                Week: 2

Tom Folkers:
     1. Unfortunately, the 12 Meter occupied a too much of my time 
        this week.
     2. Continued pricing out and getting quotes for the computer 
        hardware.
     3. Writing up cost analysis report for PAS.

Tom Sargent:
     1. Studied the TI 320 manual. I got about 80% of the way through 
        it.
     2. Studied the TI development tools.  About finished with this 
        until I actually get a TI computer and a copy of VmWare to run 
        the cross compiler.
     3. Studied Johann Schraml's software. I need to do a lot more of 
        this.
     4. Looked into alternate numerical methods for deriving the 
        correction coefficients from the raw encoder data.  I am doing 
        a some test code along these lines.
     5. Looked for some ISA based equivalents to the PC-104 TI 
        processor card.

Pete Hubbard:
     1. Reviewing MPI model 6000, 61000, 6400 boards used at the SMT 
        for encoder signal processing.
     2. Trip to SMT to measure amplitude and frequency of encoder 
        signals at the amplifier box.
     3. Received quotation from Traquair.