The following are the normal boot parameters for the Frequency Generator 
VxWorks CPU (aka siegtaler; located in the bottom of the Drumbeat rack). 

boot device          : ei 
processor number     : 0 
host name            : jever 
file name            : /opt/vxworks/siegtaler/vxWorks 
inet on ethernet (e) : 128.196.248.25:ffffff00 
inet on backplane (b): 
host inet (h)        : 128.196.248.38 
gateway inet (g)     : 
user (u)             : vwuser 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : siegtaler 
startup script (s)   : /opt/vxworks/siegtaler/startup.cmd 
other (o)            : 

In order to login to the VxWorks system, one can telnet to siegtaler and use the
username, jchen, with the password, uric1uis.

Should it become necessary to use Hannen to download vxWorks, change:

host name            : hannen
host inet (h)        : 128.196.248.19

To do this, type bootChange if you have a -> prompt.  If you're using the
console terminal and you have the [VxWorks Boot]: prompt, type c. You will be
prompted for all the values.  Hit <RETURN> to keep the same value, and type the
new value where needed.  (It is not necessary or possible to erase the previous
value with <BACKSPACE>.)  To (re)boot the system type reboot at the -> prompt
or @ at the [VxWorks Boot]: prompt.  (From the latter, you can also type the p
command to see a print out of the boot parameters.)