To Change the Continuum Channel Used by the On-line Chef & Toolbox:



The OBST command

	    OBSINP DIS1 n

will change the Chef on-line program to use channel "n" for the focus and
pointing fits.  The change takes effect the next time an observation is begun. 

To change the current toolbox program, type the following OBST command:

	    MBTOOL SIG1=x1

where "x" is "a" for channel 1, "b" for channel 2, "c" for channel 3, "d" for
channel 4, or "e" for channel 5.